GSBmbH

Saganer Straße 26
90475 Nürnberg

+49 (0)911 97911-0
info@gsbmbh.com

FIRESAFE® R90 - Accessory components

 

Trigger device with smoke detector type AOR (room surveillance)

FIRESAFE R90 Zubehör Rauchmelder Typ AOR copy

Connected to the electric engine of the fire protection closure FIRESAFE R90, in order to initiate automatical closure.

Consists of:

  • 2 optical smoke detectors ORS 142
  • 2 mounting bases for a. P. montage 143 A
  • 1 controlling device STG 001
  • 1 pushbutton DKT 002

Trigger device with temperature switch type ATS (room surveillance)

FIRESAFE R90 Zubehör Auslöseeinrichtung ATS copy

Connected to electric engine of fire protection closure FIRESAFE R90, in order to initiate automatical closure.

Consists of:

  • 2 thermoswitches TDS 247
  • 2 mounting bases for a. P. montage 143 A
  • 1 controlling device STG001
  • 1 pushbutton DKT 002

Smoke detector type ORS

FIRESAFE R90 Zubehör Rauchmelder ORS copy

Spare optical smoke detector for room surveillance

Consists of:

  • 1 smoke detector ORS 142
  • 1 mounting base for a.P. montage 143 A

Temperature switch type TDS

 
FIRESAFE R90 Zubehör Thremoschalter TDS copy

Spare thermoswitch for room surveillance.

Consists of:

  • 1 thermoswitch TDS 247
  • 1 mounting base for a.P. montage 143 A

Capillary tube sensor type TLR-72/100

GSB FIRESAFEII K90 TLR 72

For additional detection inside the tube system

Capillary tube sensor with reset button and spiral protection tube, trigger temperature 72°C

Optionally:

Capillary tube sensor with reset button and spiral protection tube, trigger temperature 100°C

Pushbutton type DKT 002

FIRESAFE R90 Zubehoer Druckknopftaster DKT 002

Needed for external closure, in case multiple FIRESAFE R90 are controlled with the controlling device STG 001.

Time delay relay typ ZVR

FIRESAFE R90 Zubehoer Zeitverzoegerungsrelais Typ ZVR

Delays closure from 0 up to 120 seconds.

Consists of:

  • time delay relay
  • top-hat rail for installation into controlling device STG 001

Drain outlet

FIRESAFE R90 Zubehoer Ablaufstutzen

Needed in order to remove incidental liquids (oil mist, washing exhaust air) permanently or periodically from the FIRESAFE R90

Drain outlet 1 1/4 "; material V2a; length 50mm

Cleaning aperture

FIRESAFE R90 Zubehoer Reinigungsoeffnung

Needed for extraction of solids (flour, sawdust, etc.). Cleaning the FIRESAFE R90 can be done without affecting the production.

Special rubber seal

FIRESAFE R90 Zubehoer Spezialgummidichtung

Needed in order to minimize the intrusion of the conveyed solid goods (short textile fibres, sawdust, etc.) into the FIRESAFE R90.

Connection pipes sliding nipples SNI/SNA and flat flange FL

FIRESAFE R90 Zubehoer Schiebenippel

In all cases, the FIRESAFE R90 is delivered with smooth pipe sockets! Because of the sliding nipples a quick and easy flange connection onto the tube/channel system is possible

Connection tubes:

  • flat flange: type FL with elongated hole, galvanized
  • sliding nipple inside type SNI, side 15 mm, length 100 mm, galvanized
  • sliding nipple outside type SNA, side 10 mm, length 100 mm, galvanized

 

back

100% unrestricted cross-section

  • less deposit
  • less cleaning expenditure
  • no additional pressure drop
  • low operating expenses
  • 100% security